2025/06/30

Application fields of sprocket

Industrial machinery and equipment: such as conveyors, cranes, and excavators, etc., sprockets and chains together constitute a chain drive system to achieve reliable transmission. Agricultural machinery: such as sprockets and chains on tractors are used to transmit power, drive the rotation of rotary tillers or harvesting machinery, and achieve the cultivation and harvesting of farmland.

2025/06/30

A sprocket is a wheel with interlocking chain teeth.

Wheels are typically used in pairs, one as a driving wheel and the other as a driven wheel. They are connected by a chain or belt. When force or motion is applied to the driving sprocket, the sprocket smoothly transmits power to the driven sprocket through the meshing of the teeth with the chain, thereby changing the torque or speed of the mechanical system. This transmission method is not only efficient but also simple in structure and has a strong load-carrying capacity, making it particularly suitable for heavy-load and high-speed transmission applications.

2025/06/30

Gear manufacturing process

Gear blank machining: The heat-treated blanks enter mechanical processing, mainly to prepare for the next stage of tooth profile machining, machining the datum, so that the accuracy of the inner hole and end face of the gear basically meets the specified technical requirements.

2025/06/30

Gear Classification

Spur gear: A cylindrical gear with teeth parallel to the axis, widely used. Helical gear: A cylindrical gear with helical teeth, capable of withstanding higher loads and running more quietly.

2025/06/30

The size and tolerance standards of national standard table wheels

Interference fit: Suitable for heavy-duty equipment, where the shaft diameter can be 0.02mm to 0.05mm larger than the inner diameter. Hydraulic equipment is required for press fitting. Clearance fit: Used in situations requiring frequent disassembly. The clearance is usually 0.1% to 0.3% of the inner diameter. For example, a car assembly line sets the inner diameter of the turntable to the shaft diameter + 0.15mm, balancing positioning accuracy and quick replacement needs.